1

Nose Pour Tilting Melters

NOSE POUR TILTING CRUCIBLE FURNACE-max temperature 2400 deg F.  Furnaces operating above 3000′ elevation may require a larger blower and manifold to operate with the same efficiency.    Please let us know the elevation.

We recommend that the customer install a pressure gauge and regulator on their incoming line.  We DO NOT provide these.

 

t200

T-200-MT

The nose pour feature permits precise control of molten metal flow into a mold or pouring ladle. The nose pour configuration locates the crucible pouring lip coaxial with the trunnion bearings, so it is in a constant position during pouring. This provides greater safety and the shorter molten metal stream reduces the amount of hot metal exposed to cooling and oxidation.

The tilting mechanism is available in either hydraulic or manual hoist configuration, as shown in the illustration. The hydraulic tilt is designed with two double acting cylinders with hydraulic pump, valves and control systems. The manual hoist system employs an overhead chain with an electric or air hoist (furnished by customer) to tilt the furnace. Each design assures a smooth pouring action.

FURNACE
MODEL
CRUCIBLE SIZE
MELTING
CAPACITY
BRASS
PER MELT
COMBUSTION
CHAMBER
DIMENSIONS
ABCDEFGBLOWER AND MOTOR RATINGBTU GAS RATING & PRESSUREGAS LINE SIZEGAS VALVE SIZEAPP. SHIPPING WEIGHT
T-200No. 200 thru No. 275825 lbs.23"Dia - 25"Deep102"85"40"95"27"58"17"230CFM
2 HP
1,200,000
10-12 oz.
2"1-1/4"4,509 lbs.

 

T200-HT line drawing– click here

Model T200- available in 3 models:

900075 T200-MT with  manual control tilt mechanism (requires overhead hoist)

900085 T200-HT with hydraulic tilt option

900082 T200-HT-PC with proportionating control.  This allows the gas/air mixture to stay in proportion at all levels of the firing rate, from high to low, helping the furnace operate at maximum efficiency, while still maintaining a fast melt rate.  A single switch operates the burner.