1

S116H Adjustable Latching Hand Crucible Shank

S116H Latching Hand Crucible Shank for holding a #10 or #16 crucible while pouring molten metal. Adjust the pads to fit the crucible. Safety latch holds crucible firmly in shank while pouring metal.  Handle is 41″ with a handle ring on the end (not shown in picture). Designed for 1 person operation.

This shank will also fit an A20 Super Salamander Morganite crucible.




S116SE Adjustable Latching Single End Shank

S116SE Adjustable Latching Single End Shank – for holding #10 thru #16 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation.




S230SE Adjustable Latching Single End Shank

S230SE Adjustable Latching Single End Shank – for holding #20 thru #30 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation.




S230DE Adjustable Latching Double End Shank

S230DE Adjustable Latching Double End Shank – for holding #20 thru #30 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. SHIPS VIA TRUCK.

Note:  Picture to be updated.   Double latch is not standard on the S230DE, but can be added for an additional charge.




S450SE Adjustable Latching Single End Shank

S450SE Adjustable Latching Single End Shank – for holding #40 thru #50 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck- specify truck line at checkout or call the order in to us for a prepaid rate. (Bail and crucible ordered separately.)




S450DE Adjustable Latching Double End Shank

S450DE Adjustable Latching Double End Shank – for holding #40 thru #50 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. Ships via truck.




S670SE Adjustable Latching Single End Shank

S670SE Adjustable Latching Single End Shank – for holding #60 thru #70 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck-specify your truck line at checkout or call us for a prepaid rate. (Crucible and bail ordered separately.)




S670DE Adjustable Latching Double End Shank

S670DE Adjustable Latching Double End Shank – for holding #60 thru #70 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S890SE Adjustable Latching Single End Shank

S890SE Adjustable Latching Single End Shank – for holding #80 thru #90 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck.




S890DE Adjustable Latching Double End Shank

S890DE Adjustable Latching Double End Shank – for holding #80 thru #90 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S1050DE Adjustable Latching Double End Shank

S1050DE Adjustable Latching Double End Shank – for holding #100 thru #150 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S1050SE Adjustable Latching Single End Shank

S1050SE Adjustable Latching Single End Shank – for holding #100 thru #150 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. This item must ship via truck. Specify a truck line at check out or call us for a prepaid rate. (Crucible and bail ordered separately.)