S116H Adjustable Latching Hand Crucible Shank

S116H Latching Hand Crucible Shank for holding a #10 or #16 crucible while pouring molten metal. Adjust the pads to fit the crucible. Safety latch holds crucible firmly in shank while pouring metal.  Handle is 41″ with a handle ring on the end (not shown in picture). Designed for 1 person operation.




S116SE Adjustable Latching Single End Shank

S116SE Adjustable Latching Single End Shank – for holding #10 thru #16 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation.




S230SE Adjustable Latching Single End Shank

S230SE Adjustable Latching Single End Shank – for holding #20 thru #30 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation.




S230DE Adjustable Latching Double End Shank

S230DE Adjustable Latching Double End Shank – for holding #20 thru #30 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. SHIPS VIA TRUCK.




S450SE Adjustable Latching Single End Shank

S450SE Adjustable Latching Single End Shank – for holding #40 thru #50 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck- specify truck line at checkout or call the order in to us for a prepaid rate. (Bail and crucible ordered separately.)




S450DE Adjustable Latching Double End Shank

S450DE Adjustable Latching Double End Shank – for holding #40 thru #50 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. Ships via truck.




S670SE Adjustable Latching Single End Shank

S670SE Adjustable Latching Single End Shank – for holding #60 thru #70 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck-specify your truck line at checkout or call us for a prepaid rate. (Crucible and bail ordered separately.)




S670DE Adjustable Latching Double End Shank

S670DE Adjustable Latching Double End Shank – for holding #60 thru #70 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S890SE Adjustable Latching Single End Shank

S890SE Adjustable Latching Single End Shank – for holding #80 thru #90 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. Must ship via truck.




S890DE Adjustable Latching Double End Shank

S890DE Adjustable Latching Double End Shank – for holding #80 thru #90 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S1050DE Adjustable Latching Double End Shank

S1050DE Adjustable Latching Double End Shank – for holding #100 thru #150 crucibles while pouring molten metal. Safety latch holds crucible firmly in shank while pouring. Designed for 2 person operation with a yoke on each end. One yoke swivels on shaft. MUST SHIP VIA TRUCK.




S1050SE Adjustable Latching Single End Shank

S1050SE Adjustable Latching Single End Shank – for holding #100 thru #150 crucibles while pouring molten metal. Two safety latches hold crucible firmly in shank while pouring. Designed for 2 person operation. This item must ship via truck. Specify a truck line at check out or call us for a prepaid rate. (Crucible and bail ordered separately.)