004430 MT400 replacement meter only

Replacement 8 in. Thermocouple Tip type K – For Model MT400.  Maximum temperature 2300 deg F

Replacement 15 in. Thermocouple Tip type K – Can be used on the MT-400 or MD250 pyrometers. Maximum temperature 2300 deg F.

WM-1001 – Digital Wall Mount Pyrometer – No Alarm Lights
-with hand lance attached by 15′ conduit to Nema 1 enclosure. Digital Watlow instrument with 12″ type K  thermocouple (see below-replacement part number 004039). 120v

The WM-1001 pyrometer uses a Watlow PM6L1EJ-AAAAHWP hi limit instrument to display the temperature of the molten metal to determine if the metal is within a preset temperature range for pouring.   The preset temperature is 2300 deg F.

42″ wall mount pyrometer lance with handle grip adaptor. NOT for hand held pyrometers.

WM-400 Wall Mount Analog Pyrometer – 0-2300 degrees F temperature range, with 36″ Lance , 12″ protected tip, and 15 ft. conduit.  Uses the MT400 analog meter as shown.

MX-250 – Inside Plow Assembly – Abrasion Resistant Steel, outside lower leading edge of plow hard surfaced for extra wear protection.

MX-250 – Outside Plow Assembly (Less Arm) – Abrasion Resistant Steel, outside lower leading edge of plow hard surfaced for extra wear protection.

MX-100 – Outside Plow Assembly – Abrasion Resistant Steel, outside lower leading edge of plow hard surfaced for extra wear protection.

MX-100 – Inside Plow Assembly – Abrasion Resistant Steel, outside lower leading edge of plow hard surfaced for extra wear protection.

ML-250 – Crib Liner with ribs – 10 ga., Abrasion Resistant Steel.

Call for pricing.  Truck shipment.

ML-250 – Discharge Door Replacement Flat Seal Ring – 9 1/32 inches (for ML250 prior to 2013)