Product Specifications

PART No. 100002 – MODEL C-10 WITH No. 4UV SAFETY

Stationary crucible and pot furnace, for melting aluminum in iron or steel pots or aluminum and brass in crucible in furnace chamber. Capacity No. 10 or No. 16 crucible or a 6″ diameter x 8″ deep metal pot suspended in furnace cover ring. Furnace lining, lid and cover ring are high alumina air rammed sections, backed with refractory insulation. Chamber size 10″ diameter x 11″ deep; with tangent fired burner and side exhaust port; drop type lid and refractory lid ring. Temperature range to 2400° F, nominal 225,000 BTU; for natural or bottled gas; with high speed universal brush type motor blower rated at 1/3 HP, 120 volt, single phase, (60 hz. only). Complete with silicon carbide rest block and 4 UV ultra violet combustion safeguard system. Approximate shipping weight 400 pounds.

 

PART No. 900005 – MODEL C-20 WITH No. 4UV SAFETY

Stationary crucible and pot furnace for melting aluminum in iron or steel pots or aluminum and brass in crucible in furnace chamber. Capacity No. 30 crucible for brass, No. 40 crucible for melting and ladling aluminum or a 8″ diameter x 10″ deep cast iron pot suspended in furnace cover ring. Furnace lining, cover ring and drop lid are high alumina, air rammed sections, backed with refractory insulation. Chamber size: 14″ diameter x 16″ deep. Rated for 2400° F, nominal 325,000 BTU for natural or bottled gas; complete with a No. 175 Turbo Blower with standard 1/2 HP, ball bearing, 3600 RPM, open drip-proof motor, 120/240 volt, single phase or 240/480 volt, three phase motor. Furnace supplied with silicon carbide crucible rest block and 4 UV ultra violet combustion safeguard system. Approx. shipping weight 815 pounds. (Specify voltage and phase when ordering).

PART No. 900410 – MODEL B-160 WITH No. 4UV SAFETY

Stationary crucible furnace capable of melting grey iron within one hour period; average melting speeds – aluminum, 12 to 14 minutes; yellow brass, 22 to 24 minutes; class 30 grey iron, 55 minutes. Capacity No. 16 crucible. Furnace lining and lid are high alumina air rammed sections backed with refractory insulation. Chamber size 10″ diameter x 12″ deep; with tangent fired burner and lid exhaust opening. Attainable combustion chamber temperatures to 2400° F; nominal 425,000 BTU, with two valve mixer to use either natural or bottled gas. Complete with No. 175 Turbo Blower, 90 CFM, 8 oz. with 1/2 HP, 3600 RPM, ball bearing, open drip-proof, 56 frame “C” flange motor. Available in 120/240 volt, single phase, or 240/480 volt, three phase . Furnished with silicon carbide crucible rest block. No. 4UV ultra violet combustion safeguard system, consisting of an automatic spark ignition with blower air switch and continuous flame monitoring. Provides furnace shutdown in event of air blower failure, flame or power failure. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. Approximate shipping weight 594 pounds. (Specify voltage and phase when ordering).

PART No. 900015 – MODEL B-301 WITH No. 4UV SAFETY

Stationary crucible furnace, capacity No. 30 crucible, for melting aluminum and copper alloys, plus class 25 to 30 grey iron in limited quantities. Furnace lining and lid are high alumina, air rammed sections, backed with refractory insulation. Chamber size 13″ diameter x 15″ deep, with dual tangent burners and lid exhaust opening. Attainable combustion chamber temperatures to 2400° F, nominal 750,000 BTU with two valve mixer to use either natural or bottled gas. Complete with No. 1610 Industrial Turbo Blower, 150 CFM, 12 oz. with 1HP, 3600 RPM, ball bearing, drip-proof motor. Available in 120/240 volt, single phase or 240/480 volt, three phase. Furnished with silicon carbide crucible rest block. No. 4UV ultra violet combustion safeguard system, consisting of an automatic spark ignition with blower air switch and continuous flame monitoring. Provides furnace shutdown in event of air blower failure, flame or power failure. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. Approximate shipping weight 920 pounds. (Specify voltage and phase when ordering).

PART No. 900035 – MODEL B-702 WITH No. 4UV SAFETY

Stationary crucible furnace, capacity No. 40 through No. 70 crucible; for melting aluminum and copper alloys, plus Class 25 to 30 grey iron in limited quantities. Furnace lining and lid are high alumina, air rammed sections, backed with refractory insulation. Chamber size 17″ diameter x 20″ deep, with dual tangent burners and lid exhaust opening. Attainable combustion chamber temperatures to 2400° F; nominal 900,000 BTU, with two valve mixer to use either natural or bottled gas. Complete with No. 1912 Industrial Turbo Blower, 210 CFM, 12 oz. with 2 HP; 3600 RPM, ball bearing, drip-proof motor, 120/240 volt, single phase or 240/480 volt, three phase. Furnished with silicon carbide crucible rest block. No. 4UV ultra violet combustion safeguard system, consisting of an automatic spark ignition with blower air switch and continuous flame monitoring. Provides furnace shutdown in event of air blower failure, flame or power failure. Wiring conform to National Electric Code. Electrical components are UL and CSA listed. Approximate shipping weight 1,735 pounds. (Specify voltage and phase when ordering).

PART No. 900055 – MODEL B-1501 WITH No. 4UV SAFETY

Stationary crucible furnace, capacity No. 80 through No. 150 crucible. For melting aluminum and copper alloys, plus Class 25 to 30 grey iron in limited quantities. Furnace lining and lid are high alumina, air rammed sections, backed with refractory insulation. Chamber size is 22″ diameter x 24″ deep, with four tangent burners and lid exhaust opening. Attainable combustion chamber temperatures to 2400° F; nominal 1,200,000 BTU with two valve mixer to use either natural or bottled gas. Complete with No. 1912 Industrial Turbo Blower 230 CFM, 16 oz. with 2 HP; 3600 RPM, ball bearing, drip-proof motor, 120/240 volt, single phase, or 240/480 volt, three phase. Furnished with silicon carbide crucible rest block. No. 4UV ultra violet combustion system, consisting of an automatic spark ignition with blower air switch and continuous flame monitoring. Provides furnace shutdown in event of air blower failure, flame or power failure. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. Approximate shipping weight 2,786 pounds. (Specify voltage and phase when ordering).

Part No. 900057- MODEL B-2001 With No. 4 UV Safety System

Stationary crucible furnace, for crucible sizes 150 — 225. For melting aluminum and copper alloys, plus class 25 and 30 grey iron in limited quantities. Furnace lining and lid are made from high alumina, air rammed sections, backed with 2800 degree refractory insulation. Chamber size is 22” diameter x 24” depth, with four tangent burners and a lid exhaust opening. The attainable combustion chamber temperature is 2400 degrees F. with a nominal 1,200,000 BTU, two valve mixer to be used with either natural or propane gas. Provided with our model 1912 Industrial Turbo Blower, 230 CFM, 16 oz. with a 2 HP ,2600 RPM ball bearing type drip proof motor. Available in your choice of 120/240 volt, single phase, or 240/480 volt, three phase, and a 13 x 2” silicon carbide base block. The 4 UV Ultra Violet Safeguard System consists of automatic spark ignition with a blower air switch and continuous flame monitoring. Provides furnace shutdown in the event of blower failure ,flame or power failure. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. The approximate shipping weight is 3110 pounds. PLEASE SPECIFY YOUR VOLTAGE REQUIREMENTS WITH YOUR ORDER.

PART No. 900988 – MODEL T-160 WITH No. 4UV SAFETY

High Temperature crucible melting furnace with manual control tilt mechanism. Tilt mechanism to be oil filled gear box with worm/worm gear manual hand wheel. Designed to use No. 16 standard crucible. Tilting mechanism to give infinite control of metal stream when discharging into pouring ladle. Burner system to be equipped with turbo blower and standard motor in all standard voltages and phases. Wiring and electric conform to the National Electric Code. Electrical components are UL and CSA listed and approved. Shipped complete with crucible rest, combustion safeguard system, with blower air switch. Provides furnace shutdown and gas line valve closure in event of air blower failure, flame or electric power failure. Approximate shipping weight 785 pounds.

PART No. 900073 – MODEL T-301 MANUAL TILT WITH No. 4UV SAFETY

High Temperature crucible melting furnace with manual control tilt mechanism, plus automatic spark ignition and the No. 4UV ultra violet combustion safeguard system and blower air switch. Provides furnace shutdown and gas line valve closure in event of air blower failure, flame or electric power failure. Designed to use No. 30 crucible. Tilting mechanism to give infinite control of metal stream when discharging into pouring ladle. Wiring conforms to the National Electric Code. Components UL and CSA listed and approved. Shipped with crucible rest. Approximate shipping weight 1,085 pounds.

PART No. 900060 – MODEL T-80 MANUAL TILT WITH No. 4UV SAFETY

Center Pivot Tilting Crucible Furnace, with Pivot Trunnion Bearings at its center of gravity for easy tilting with gear reducer and hand wheel. Includes the No. 4 UV ultra violet safety system consisting of automatic spark ignition, with blower air switch and continuous flame monitoring. Provides furnace shutdown in the event of electric power failure, air blower failure, or flame outage. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. For crucible sizes No. 80 through No.100. Attainable combustion chamber 2400° F, for melting aluminum and copper alloys. With cover derrick, exhaust and charging hole in cover. Furnace lining and cover are high alumina, air rammed sections, backed with high temperature insulation. Chamber size 17″ diameter x 20″ deep, with one tangent fired burner, nominal 850,000 BTU. Furnace equipped with manual two valve mixer to use with either manufactured or natural fuel gas. With No. 1611 Turbo Blower, 180 CFM at 12 oz. with 2 HP, 3600 RPM, ODP, ball bearing motor, 120/240 volt, single or 240/480 volt, poly phase motor . Complete with silicon carbide crucible rest block 12″ diameter x 2″ high. Floor space required, 7′ x 5′, lowered height to trunnion 3′, maximum overall height tilted 6′. Approximate shipping weight 2.033 pounds. (Specify voltage and phase when ordering).

 

PART No. 900075 – MODEL T-200-MT (Manual Tilt) WITH No. 4UV SAFETY

Tilting Crucible Furnace, with nose pour configuration with Pouring Spout Coaxial with trunnions. Includes the No. 4UV ultra violet safety system, consisting of automatic spark ignition, with blower air switch and continuous flame monitoring. Provides furnace shutdown in the event of electric power failure, air blower, or flame outage. Wiring conforms to the National Electric Code. Electrical components are UL and CSA listed. For crucible sizes 200-275. Attainable combustion chamber temperature to 2400° F, for melting aluminum and copper alloys. With cover derrick and charging hole in cover. Furnace lining and cover are high alumina, air rammed sections, backed with high temperature insulation. Chamber size 23″ diameter x 25″ deep, with four tangent fired burners, nominal 1,200,000 BTU. Furnace equipped with manual two valve mixer to use either manufactured or natural fuel gas; with No. 1912 Turbo Blower, 230 CFM at 16 oz. with 2 HP, 3600 RPM, ODP, ball bearing motor, 120/240 volt, single or 240/480 volt, poly phase, 60 hz., complete with silicon carbide crucible rest block. Manual tilt requires separate overhead hoist (either hand, electric or air driven) to tilt furnace. Hoist not furnished with furnace. Floor space required, 9′ x 6′; lowered height to trunnion 40″, maximum overall height tilted 8′. Approximate shipping weight 4005 pounds. (Specify voltage and phase when ordering).

PART NO. 900085 MODEL T-200-HT (Hydraulic Tilt)

Tilting Crucible Furnace, same as specified in part number 900075, with combustion safeguard system, plus hydraulic tilt. The hydraulic tilt employs two cylinders actuated by a motorized hydraulic pump with self contained reservoir, strainers, safety valves, and three position hydraulic hand valve. With magnetic contactor and start-stop station. Hydraulic system same voltage and phase as blower system. Approximate shipping weight 4,509 pounds.